Sign in a5 5 0 0 0-5 5v3H7v4h3v8h4v-8h3l1-4h-4V7a1 1 0 0 1 1-1h3z"/> Facebook

What Is Solar Panel Degradation and How Does It Affect Your System?

Modern Tier 1 solar panels lose about 0.4-0.5% of output per year — meaning your 5kW system still produces 88% at year 25. Here is what that really means.

If you are about to spend PHP 235,000-295,000 on a 5 kW solar system in Cebu, you want to know what you are actually buying. Will the panels still produce power in 15 years? 25? What does the warranty actually cover, and what does "degradation" really mean for your monthly bill?

The short answer: modern Tier 1 panels degrade slowly enough that your system still produces 87-90% of its original output at year 25. A 5 kW system installed today produces about 8,500 kWh in year one. In year 25, it should still produce around 7,500 kWh — more than enough to cover most Cebu home loads.

What "degradation" actually means

Solar panel degradation is the gradual reduction in power output over time. Every panel loses a bit of output every year, no matter how well it is made or how carefully it is installed. The losses come from three main sources:

  • Light-induced degradation (LID): 1-3% loss in the first few hours of sunlight exposure. This is a one-time hit, not ongoing.
  • Potential-induced degradation (PID): Mostly affects early P-type panels in humid conditions. Modern panels with better grounding and anti-PID cell design have largely eliminated this.
  • Long-term wear: Microscopic cracks in cells, delamination, corrosion of contacts, backsheet yellowing, and EVA (encapsulant) browning. This is the slow, ongoing part — typically 0.3-0.5% per year for Tier 1 panels.

The combined effect is a curve that drops steeply in year one (the LID) and then declines slowly and predictably over the next 24+ years.

What "0.5% per year" looks like in real terms

Most Tier 1 panels sold in 2026 have a degradation rate around 0.4-0.5% per year after the first year. Here is what that means for a typical 5 kW Cebu system:

  • Year 1: 100% output (~8,500 kWh)
  • Year 5: 98% output (~8,330 kWh)
  • Year 10: 95.5% output (~8,120 kWh)
  • Year 15: 93% output (~7,900 kWh)
  • Year 20: 90.5% output (~7,700 kWh)
  • Year 25: 88% output (~7,480 kWh)

Over 25 years, that 5 kW system produces roughly 200,000 kWh — enough to cover the lifetime electricity consumption of an average Cebu household twice over.

The math that matters: At PHP 11/kWh, a 5 kW system that produces 200,000 kWh over its lifetime saves you about PHP 2.2 million in electricity costs. Even at conservative degradation rates, the system pays back the install cost many times over.

Why N-type panels degrade slower than P-type

If you have looked at quotes from different installers, you have probably seen both P-type (PERC) and N-type (TOPCon or HJT) panels offered. The N-type panels cost a bit more but degrade measurably slower:

  • P-type PERC: First-year degradation ~2%, then ~0.45%/year. Most common panel technology globally through 2023.
  • N-type TOPCon: First-year degradation ~1%, then ~0.40%/year. Now the industry standard for premium installs.
  • N-type HJT: First-year degradation ~1%, then ~0.30%/year. The newest tech, used in the highest-end panels.

Over 25 years, the difference between P-type and N-type adds up to 3-5 percentage points of total production. On a 5 kW system, that is roughly 8,500-14,000 kWh of extra lifetime output — worth about PHP 100,000-150,000 at retail rates.

What actually causes faster degradation

Some panels degrade much faster than their warranty suggests. The usual culprits are not the brand — they are the install environment:

Salt air corrosion

Coastal Cebu sites (Mactan, Camotes, Bantayan, eastern Cebu coast) experience accelerated salt corrosion on panel frames, junction boxes, and cell contacts. We use stainless-steel mounting hardware and IP68 junction boxes on every coastal install, plus panels rated for salt-mist corrosion (IEC 61701 Severity 6).

Heat without airflow

Panels mounted flat against a roof with no airflow underneath run 10-15°C hotter than panels with proper standoff mounting. That extra heat accelerates backsheet and encapsulant aging. Our roof mounts maintain at least 75mm of standoff for airflow.

Poor initial quality

Budget no-name panels from unknown factories can degrade at 1-2% per year instead of 0.4-0.5%. We have seen 5-year-old no-brand panels producing 75% of nameplate. Tier 1 panels almost never do this.

Hot spots and bypass diode failure

Partial shading that is not addressed with optimizers or microinverters creates hot spots in cells. Over years, hot spots cook the solder joints and contacts, accelerating localized degradation. This is preventable with proper design.

How the warranty protects you

Every Tier 1 panel comes with two warranties — a product warranty and a linear power warranty. They cover different things:

  • Product warranty (12-15 years): Covers manufacturing defects — delamination, junction box failure, frame cracks, severe yellowing. If the panel physically fails, you get a replacement.
  • Linear power warranty (25-30 years): Guarantees the panel produces at least X% of nameplate at year 25 (typically 84-87%). If it produces less, you get proportional compensation.

For the panels we install most:

  • Canadian Solar 615W (HiKu6): 12-year product, 25-year linear power (84.8% at year 25).
  • Jinko Tiger Neo 625W: 15-year product, 30-year linear power (87.4% at year 30).

In practice, product warranty claims are rare — well under 1% of panels fail. Power warranty claims almost never happen because Tier 1 panels routinely exceed their guaranteed degradation curve.

How to verify degradation on a system you already own

If you have had a system for a few years and want to check whether it is degrading faster than expected:

  1. Pull your annual production from the inverter app or monitoring platform. Most inverters (Solis, Huawei, Fronius, SMA) keep at least 12 months of history.
  2. Compare against your year-one baseline. A 5 kW system that produced 8,500 kWh in year one should be at roughly 8,300 kWh in year four. If it is at 7,500 kWh, something is wrong.
  3. Look at peak output on a clear day. A 5 kW system on a cloudless April noon should hit 4,200-4,500 W of AC output (after temperature losses). If it tops out at 3,800 W, panels may be underperforming.
  4. Check for shading that has grown over time. A tree that was 3 meters away at install might be 5 meters away by year five. Trim it.

If the numbers look bad, a solar maintenance visit (typically PHP 3,000-5,000) covers I-V curve tracing on each panel to identify the weak ones.

The bottom line

Solar panel degradation is real but slow. A properly installed Tier 1 system in Cebu loses about 0.4-0.5% of output per year, which means your 5 kW system is still producing 88-90% of its original output at year 25. That is a meaningful decline, but it does not change the economics — the system still pays back in 4-6 years and produces free electricity for two more decades after that.

The risk of fast degradation is almost entirely about installer choices: salt-rated mounting near the coast, airflow under the panels, Tier 1 panels with strong warranties, and proper shading mitigation. Our free site survey covers all of these and includes a written design rationale so you know exactly why each component was specified.

Make sure your system is sized for reliability.

A free site survey covers your outage history, load profile, and battery needs. Most proposals within 48 hours.