Sign in a5 5 0 0 0-5 5v3H7v4h3v8h4v-8h3l1-4h-4V7a1 1 0 0 1 1-1h3z"/> Facebook

Why Does Solar Production Change During Cloudy or Rainy Days?

A clear-sky day in Cebu is not what solar panels are sized for. Here is what actually happens on overcast and rainy days, and why it does not hurt your payback.

If you have watched your solar app during a Cebu typhoon or a week of habagat rain and seen production crater to almost nothing, you are not imagining it. Solar output genuinely drops on cloudy and rainy days — sometimes to 10-20% of a clear-sky day. But that does not mean the system is broken, and it almost never changes the long-term economics of going solar in Cebu.

This guide explains what actually happens to a solar panel when clouds roll in, why rain sometimes helps more than it hurts, and how to think about cloudy-day production when you are sizing a system.

Why sunlight makes electricity in the first place

Solar panels are rated under Standard Test Conditions — 1,000 watts per square meter of sunlight hitting the panel at a 25°C cell temperature. That rating is a clear-sky noon number. In Cebu, we average 5-6 peak sun hours per day across the year, which is one of the better totals in Asia.

But peak sun hours are not the same as hours of daylight. A partly cloudy afternoon in Mandaue might still count as 0.4 peak sun hours. A heavy overcast day during the southwest monsoon might count as 0.2. A solid rainsquall — zero.

What "cloudy" actually does to a panel

Clouds do not turn solar panels off. They reduce the amount of direct sunlight reaching the cells. The exact drop depends on three things:

  • Cloud thickness. Thin high cirrus clouds might only cut output by 10-30%. Thick cumulonimbus can cut it by 80% or more.
  • Cloud type. Even heavy overcast still produces diffuse light, which panels can use. Panels use roughly 50-80% of diffuse light, depending on the cell technology.
  • Whether the cloud is moving. A moving cloud creates a flickering ramp — production drops, then recovers, then drops again. Your monitoring app will show this as a sawtooth pattern.

Modern half-cut and PERC cells are better at low-light performance than older panels. If your system was installed in the last 3-4 years, you already have panels that perform well in diffuse light.

Rule of thumb for Cebu: A heavily overcast day typically produces 20-40% of clear-sky output. Light overcast: 50-70%. Partly cloudy: 70-90%. Steady rain: 10-30%.

What rain does (the underrated part)

Rain is not your enemy. It is one of the natural cleaning cycles that keeps panels producing at full output. Cebu sits in salt-air territory, especially on Mactan and along the western coast, and salt film plus dust can shave 5-15% off output within a few weeks if panels are never cleaned.

A real rain event washes most of that off in one go. In our install data, systems that go through the rainy season tend to rebound in September-October output versus August baselines, partly because the panels are clean.

There is also a small indirect effect: rain cools the panels. Solar cells lose efficiency as they heat up — roughly 0.3-0.4% per degree above 25°C. During a heavy rain, panel temperature can drop 10-15°C, which actually pushes the cells closer to their rated efficiency. You will not see this in a single hour, but in the days right after a typhoon, output can look surprisingly decent.

Real Cebu production numbers across the year

For a typical 5 kW system in Cebu with good orientation and minimal shading, monthly production tracks the weather closely:

  • March-May (dry, sunny): 450-520 kWh per month. Peak months.
  • June-August (habagat rains): 320-420 kWh per month. Lowest production.
  • September-November (post-rain, sunny again): 420-490 kWh per month.
  • December-February (cool, partly cloudy): 400-460 kWh per month.

Annualized, that adds up to roughly 25-28 kWh per installed kW per day averaged across the year — well above the global average and the reason Cebu pays back so quickly.

Does a typhoon week ruin the economics?

No. We size systems on annual production, not best-month production. Even with two weeks of heavy rain and one direct typhoon landfall (Cebu averages 1-2 typhoon hits per year), the lost production is at most 5-8% of annual output. A system designed around your annual load will still pay back in 4-6 years.

The bigger risk during a typhoon is not production — it is physical damage. Panels are rated to handle 2400 Pa wind loads (roughly 200 kph winds), and our mounts are engineered for the local wind zone. Typhoon Odette in 2021 was the stress test; almost every SolarConcept system on Mactan and Cebu City came through intact, though a few perimeter panels on flat-roof installs needed re-clamping.

What you can do to maximize cloudy-day output

A few design choices make a measurable difference on low-light days:

  1. Use half-cut or PERC cells. Better low-light response. Most panels we install today already have this.
  2. Avoid shading at all costs. A single shaded cell can drag down an entire string’s output by 30-50%. Trim trees before install, not after.
  3. Choose microinverters or power optimizers if your roof has unavoidable partial shading. They isolate the impact of one bad panel from the rest of the string.
  4. Keep panels clean. Salt film and dust cut diffuse-light performance harder than direct sunlight. We recommend a freshwater rinse every 4-6 weeks during the dry season.
  5. Right-size your system to annual load, not to peak production. You will have plenty of export credit on sunny days to carry you through cloudy weeks.

The bottom line

Cloudy and rainy days in Cebu will produce 20-40% of your clear-sky output. That sounds low until you remember you only get 4-8 such days per month even during the rainy season, and rain washes your panels clean in the bargain. The system is sized to produce more than you need across the year, so a few bad weather weeks do not change the math.

If you want to see what cloudy-week production actually looks like on a real Cebu install, our free site survey includes a custom production model that uses your actual roof orientation and the local weather data, not a generic calculator.

See what your roof can actually produce.

Our free shade + orientation analysis gives you a real production estimate based on your actual roof, not a generic calculator.